Escalator Manufacturers

Handrail inlet

The escalator is richly endowed with the intelligence and popularity of the novel, distinctive, elegant, tensile, and modernized streamline handrail inlet and outlet design model. It appears to be more beautiful in the outer appearance It displays the nobleness and imposing manner of the conveying constructions.

Automatic oiling PLC

PLC control automatic oiling and lubricating system fulfill the ideal automatic lubrication to the transmission chain during the running process of the escalator. It not only reduces the daily repair and maintenance word load but also prolongs the service life of the driving mechanism

Step chain-roller inbuilt

The roller has been internally installed in the specially designed roller step chain. It can effectively fulfill the reduction of noise during the driving process and bring about a more smooth and quiet operation

Fault display

When some defect takes place, the trouble code will be displayed on the defect screen. It ensures the effective and accurate trouble position within the shortest time possible. In this way, it greatly enhances repair and maintenance efficiency.

Demarcation lamp

The green fluorescent lamp has been installed under the upper and lower step tread. When there is the staggering running of two connecting steps. The green fluorescent light will be sent out from the step teeth in order to help the passengers identify the stepped inlet and outlet horizontal section and enhance the riding safety.

Vertical type traction machine

It has smooth engagement and frictional reduction It guarantees extremely low noise. It can reduce than 60% of the noise. Compared with the traditional worm wheel drive. It has the higher driving efficiency

Skirt panel brush

The skirt panel brush is in the higher position of the step. It has been installed on both sides of the skirt panel. It can prevent the passenger's shoes from scratching the skirt panel It also avoids the foreign substance from entering into the steps in a safe and skirt.

Running direction indication

The running direction and forbidden display mark have been placed in the inlet and outlet of the handrail. The obvious running or forbidden instruction ensures the safe riding of the passengers with great ease.

Automatic start/stop

The infrared ray sensor which is near the floor plate can detect the passenger that enters into the floor plate. After all the passengers leave, it will automatically stop the operation again in order to save the energy loss. Scanning sensor and traditional guide rod are available for your choice

Skirt panel illumination

The streamlined skirt panel lighting along the step running track not only keeps the elegant and pleasing beam of light during the operational process but also emphasizes the sound degree of visibility to the escalator in the whole building It brings about the more cozy and secure riding for vast passengers

Handrail illumination

The handrail illumination has been installed in the handrail support. The gentle light adds charm to the running escalator.

VVVF variable frequency energy-saving system

The use of the frequency converter can effectively cut down the energy loss. It can usually save 60% of the energy with the scarce stream of people. Under the no-load circumstances, the escalator operates at a low speed. It will immediately restore to the normal speed running when it detects the approach of the passenger.

Inclined handrail

It adopts the stainless steel enclosed and inclined handrail escalator. It is fit for occasions with a large stream of people, heavy loading. It is also applicable for the public traffic and transport places. It can extend the riding space to the greatest extent and increase the effective safety coefficient when there is a large flow of people.

1

Lack of phase, error phase protection:

If lack of phase or error phase has been checked out. The escalator(moving walkway)will automatically stop the operation.

2

Motor overload protection:

When the current exceeds 15% of the current rating, the escalator will automatically! stop the operation.

3

Electrical appliance loop protection:

4

Handrail inlet protection:

When some foreign substance has been clipped in the handrail inlet, the escalator(moving walkway)will automatically stop the operation.

5

Comb plate safety device:

When some foreign substance has been clipped in or between the combs, the escalator(moving walkway>will automatically stop the operation.

6

Step sagging protection device:

When there is abnormal step bending, the escalator(moving walkway)will stop the operation before the step entering into the comb plate.

7

Broken drive-chain safety device:

When the drive-chain has been over-stretched or it is broken, the escalator(moving walkway)will automatically stop the operation

8

 Broken step chain protection:

When the step(plate)chain has been over-stretched or it is broken. The escalator(moving walkway}will automatically stop the operation.

9

Over-speed protection:

When there is an over-speed to the escalator(moving walkway), it will automatically stop the operation.

10

Direction reversal protection:

When it comes to the unintentional reversal of the direction of travel. The escalator(moving walkway)will automatically stop the operation.

11

Security line:

The yellow synthetic resin security line is located in the front position and two sides of the escalator tread so that the passengers will not tread in-between the edge of the adjacent step and the lift group lengthened The moving walkway offers the selective yellow spray-painted se county line n the tread surface skirt panel. The security line on both sides of the step is higher than.

12

Emergency stop button:

When the button has been pressed down, the escalator（moving walkway ）will stop the operation.

13

Skirt panel protection:
When some foreign substance has been clipped in between the skirt panel and the skirt panel and the step the escalator（moving walkway ）will automatically stop the operation.

14

Brake protection:

When some electric force falls short of supply or it acts any of the safety devices, the brake function goes into effect by the safety device through the spring resilience action. In this way, the escalator（moving the walkway ）stops the operation.

15

Safety inspection switch:

It is a safety device to prevent from the escalator starting during the inspection and maintenance.

16

Step illumination:

When there is abnormal step bending, the escalator(moving walkway)will stop the operation before the step entering into the comb plate.

17

Alarm bell staring device:

The alarm bell rings when it starts the escalator in order to remind the passengers of the security matters.

18

 Control devise for handrail breakage:

When the handrail is broken, the escalator will automatically stop the operation.